MLX90614 ESF Non-Contact Human Body Infrared Temperature Measurement Module

If You are wandering to Build a Device Which is used to measure the temperature of a hot object like machines, flames, hot iron, device CPU. Then this MLX90614 ESF Non-Contact Human Body Infrared Temperature Measurement Module is Needed for you.
The MLX90614 ESF is an Infra-Red thermometer for non-contact temperature measurements. Both the IR-sensitive thermopile detector chip and the signal conditioning ASIC are integrated into the same TO-39 can. The Integrated MLX90614 GY-906 is a low noise amplifier, 17-bit ADC, and powerful DSP unit thus achieving high accuracy and resolution of the thermometer.

The user can configure the digital output to be PWM. As a standard, the 10-bit PWM is configured to continuously transmit the measured temperature in the range of -20 to 120 ¡C, with an output resolution of 0.14 ¡C.

Application :

• High precision non-contact temperature measurements
• Thermal Comfort sensor for Mobile Air Conditioning control system
• The temperature sensing element for residential, commercial and industrial building air conditioning Windshield defogging
• The automotive blind angle detection
• Industrial temperature control of moving parts
• Temperature control in printers and copiers
• Home appliances with temperature control
• Healthcare
• Livestock monitoring
• Movement detection
• Multiple zone temperature control Ð up to 127 sensors can be read via common 2 wires
• Thermal relay/alert
• Body temperature measurement

Features:

• Works from 3.3V to 5V input, Module has power regulator IC built-in.
• Standard I2C interface with built 2x pull up resistors.
• When measuring the temperature, please maintain a measuring distance of 1 cm.
• Small size, low cost.
• Easy to integrate.
• The factory was calibrated in a wide temperature range: -40 to 125 ¡C for sensor temperature and -70 to 380 ¡C for object temperature.
• High accuracy of 0.5¡C over the wide temperature range (0..+50 C for both Ta and To).
• Medical accuracy of 0.1¡C in a limited temperature range available on request.
• The measurement resolution of 0.01¡C.
• SMBus compatible digital interface for fast temperature readings and building sensor networks.
• Customizable PWM output for continuous reading.
• Simple adaptation for 8 to 16V applications.

Package Includes:

• 1 x MLX90614 ESF GY-906 Non-Contact Human Body Infrared Temperature Measurement Module