WS2811 Addressable RGB LED Driver IC – WorldSemi – SOP8 150mil

WS2811 RGB 3 Channel LED Driver IC is normally used to design Addressable RGB LED Strips and RGB Display boards etc. It has 3 channel driver with Data In and Data Out to achieve chainable LEDs. Comes in 8 Pin SOP 150mil Package The WS2811 is 3 output channels special for LED driver circuit. It internal include intelligent digital port data latch and signal reshaping amplification drive circuit.Also include a precision internal oscillator and a 12V voltage programmable constant current output drive. In the purpose of reduce power supply ripple, the 3 outp ut channels designed to delay turn-on function. IC use single NZR communication mode.After the chip power-on reset, the DIN port receivedata from con troller, the first IC collect initial 24bit data then sent to the internal data latch, the other data which reshaping by the internal signal reshaping amplification circuit sent to the next cascade IC through the DO port. After transmission for each chip,the signal to reduce 24bit. IC adopt auto reshaping transmit technology, making the chip cascade number is not limited the signal transmission, only depend on the speed of signal transmission. The data latch of IC depend on the received 24bit data produce different duty ratio signal at OUTR, OUTG, OUTB port. All chip synchronous send the received data to each segment when the DIN port input a reset signal. It will receive new data again After the reset signal finished. Before a new reset signal received, the control signal of OUTR ,OUTG, OUTB port unchanged. IC sent PWM data that received justly to OUTR, OUTG, OUTB port, after receive a low voltage reset signal the time retain over 50us. We offer two package SOP8 and DIP8.

Features:

• 256 Gray level PWM control
• 3 PWM Channels for R,G and B
• Cascade multiple devices through Dout and Din
• Works at +5V DC
• 18.5mA constant current drive

Package Includes:

• 1 x WS2811 Addressable RGB LED Driver IC – WorldSemi – SOP8 150mil